AWS Signatures Bucket Setup

Configure your signing key and S3 bucket

info

These instructions are for a production environment where Validator keys exist in AWS's Key Management Service and Validator signatures are posted publicly in an S3 bucket.

If you're only intending to run a Validator for testing or development purposes, consider following the local setup guide instead.

1. Create an AWS IAM user, and a signing key

Follow the instructions in Agent Keys to generate an AWS IAM user and either a KMS or a hexadecimal key. You will use this key's credentials in the following steps.

2. Create an S3 bucket

info

Note that Step 1 (creating the IAM user) is required for setting up the S3 bucket, so is required regardless of the type of key used.

Your Validator will post their signatures to this bucket.

1. Go to AWS's S3 in the AWS console.
2. On the right, click the orange "Create Bucket" button
3. Pick an informative bucket name, such as hyperlane-validator-signatures-${validator_name}-${chain_name}
4. Consider choosing the same region as the KMS key you created in the previous step.
5. Keep the recommended "ACLs disabled" setting for object ownership.
6. Configure public access settings so that the relayer can read your signatures
   1. Uncheck "Block all public access"
   2. Check the first two options that block access via access control lists
   3. Leave the last two options unchecked, we will be granting public read access via a bucket policy
   4. Acknowledge that these settings may result in public access to your bucket
7. The remaining default settings are fine, click the orange "Create bucket" button on the bottom

3. Configure S3 bucket permissions

Your Validator IAM user will need write permissions, and it should be publicly readable by the Relayer.

1. Navigate back to "Identity and Access Management (IAM)" in the AWS console
2. Under "IAM resources" you should see at least one "User", click into that
3. Click on the name of the user that you provisioned earlier (e.g. hyperlane-validator-${chain_name})
4. Copy the "User ARN" to your clipboard, it should look something like arn:aws:iam::791444913613:user/hyperlane-validator-${chain_name}
5. Navigate back to "S3" in the AWS console
6. Click on the name of the bucket you just created
7. Just under the name of the bucket, click "Permissions"
8. Scroll down to "Bucket policy" and click "Edit"
9. Enter the following contents. The Bucket ARN is shown just above where you enter the policy

{
  "Version": "2012-10-17",
  "Statement": [
    {
      "Effect": "Allow",
      "Principal": "*",
      "Action": ["s3:GetObject", "s3:ListBucket"],
      "Resource": ["${BUCKET_ARN}", "${BUCKET_ARN}/*"]
    },
    {
      "Effect": "Allow",
      "Principal": {
        "AWS": "${USER_ARN}"
      },
      "Action": ["s3:DeleteObject", "s3:PutObject"],
      "Resource": "${BUCKET_ARN}/*"
    }
  ]
}

tip

Advanced users may consider using the S3 Terraform module instead to create the S3 bucket with the correct permissions.